I-CP618 I-COPER END FEED BENT TAP CONNECTOR (INQAPHELA)

WRAS LOGO

 

Inkcazo

● Izinto eziphathekayo: ubhedu oluphezulu

● Ihambelana ne-BS EN 1254-1: 1998 umgangatho wokufakelwa kwe-copper soldering.

 

Umgangatho wokuSebenza

● Uxinzelelo oluphezulu: 25bar (PN25) ukuya kuthi ga kwi-30 ° C

● Umgangatho wokushisa osebenzayo: 0 ° C - 110 ° C

 

Isiqinisekiso

● I-WRAS ivunyiwe

 

Isicelo

● Afanele amanzi okusela ashushu nabandayo kwakunye nokufudumeza, amanzi abandayo negesi

 

Iinkcukacha zeMveliso

Iithegi zeMveliso

Imodeli kunye neSakhiwo Dimension

I-CP618 I-COPER END FEED BENT TAP CONNECTOR (INQAPHELA ENTAPHO) 1
Umzekelo Inkcazo(mm) D1 D2 L1 A B
CP618B1212 12×1/2" 12 1/2" 8.6 25.5 23.5
CP618B1412 14×1/2" 14 1/2" 10.6 31 27
CP618B1512 15×1/2" 15 1/2" 10.6 28.5 26
CP618B1612 16×1/2" 16 1/2" 10.6 31.5 25.5
CP618B1534 15×3/4" 15 3/4" 10.6 39.5 35
CP618B1634 16×3/4" 16 3/4" 10.6 39.5 35
CP618B1834 18×3/4" 18 3/4" 12.6 38.5 34.5
CP618B2234 22×3/4" 22 3/4" 15.4 41.5 35.5

Iimpawu zeMveliso

Izixhobo zeringi zobhedu zivunyiwe yi-WRAS.

Zonke izifakelo zethu zeringi ye-solder ziza kunye ne-lead-free solder kwi-ISO 9453 efakwe ngaphakathi kuyo.

Izixhobo ze-solder ring zikhawuleza kwaye zilula ukuzifaka, zifudumeza nje iziphelo nge-blowtorch, i-solder edibeneyo iya kunyibilika idala ukudibanisa okungamanzi.Ezi zifakelo zemibhobho yobhedu zifanelekile kumanzi okusela (okusela) kunye nokufudumeza kunye namanzi abandayo ngokubambisana ne-BS EN 1057 umbhobho wobhedu kunye netyhubhu.

Ingcaciso yeMveliso

1. Sebenzisa ubhedu oluphezulu, akukho nzakalo emzimbeni, ukuxhathisa kwi-corrosion.

2. Uxinzelelo lwe-bar ye-16 lulinganiswe ukuya kwi-30 ° C kunye nomgangatho wokushisa osebenzayo we-0 ° C - 110 ° C.

3. Ipakishwe kwisingxobo sangaphakathi.Ithegi yeleyibhile ingasetyenziselwa umntu ngamnye kwimarike yokuthengisa.

Inzuzo Yethu

1. Siqokelele amava atyebileyo ngokusebenzisana nabathengi abaninzi beemfuno ezahlukeneyo ngaphezu kweminyaka engama-20.

2. Kwimeko apho kukho naliphi na ibango, i-inshurensi yemfanelo yemveliso yethu inokukhathalela ukuphelisa umngcipheko.

FACTORY1
FACTORY

FAQ

1. Ndinganika isampula yomyalelo?

A: Ewe, siyakwamkela isampula yomyalelo wokuvavanya okanye ukujonga umgangatho.

2. Ngaba kukho nawuphi na umda we-MOQ kwi-odolo yethu?

A: Ewe, uninzi lwezinto ezinomda we-MOQ.Siyayamkela i-qty encinci ekuqaleni kwentsebenziswano yethu ukuze ukwazi ukujonga iimveliso zethu.

3. Indlela yokuthumela iimpahla kunye nexesha elingakanani ukuhambisa iimpahla?

A. Ngokuqhelekileyo iimpahla ezithunyelwa ngolwandle.Ngokubanzi, ixesha elihamba phambili liziintsuku ezingama-25 ukuya kwezingama-35.

4. Indlela yokulawula umgangatho kwaye yintoni isiqinisekiso?

A. Sithenga iimpahla kuphela kubavelisi abathembekileyo, bonke benza uhlolo olubanzi lomgangatho ngexesha ngalinye lenkqubo yokuvelisa.Sithumela i-QC yethu ukuba ihlole iimpahla ngokungqongqo kwaye ikhuphe ingxelo kumthengi ngaphambi kokuthunyelwa.

Silungiselela ukuthunyelwa emva kokuba iimpahla zigqithise ukuhlolwa kwethu.

Sinikezela ngewaranti yexesha elithile kwiimveliso zethu ngokufanelekileyo.

5. Indlela yokujongana nemveliso engafanelekanga?

A. Ukuba isiphene senzeke ngamaxesha athile, isampulu yokuthumela okanye isitokhwe iya kujongwa kuqala.

Okanye siya kuvavanya isampula yemveliso engafanelekanga ukufumana unobangela.Nika ingxelo ye-4D kwaye unike isisombululo sokugqibela.

6. Ngaba unokuvelisa ngokoyilo lwethu okanye isampuli?

A. Ngokuqinisekileyo, sineqela lethu lobuchwephesha le-R&D ukulandela imfuno yakho.I-OEM kunye ne-ODM zombini zamkelwe.


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi